T3 climate rating
T3 is the tropical rating: units built and tested for high-ambient conditions rather than adapted from a European design. It is printed on the rating plate, not a marketing phrase.
T3 inverter split systems
MTK split systems are T3-rated inverters running R32 — specified for high-ambient climates rather than adapted from a mild one. Two capacities, and we install and service them ourselves.
Most air conditioners sold here are designed for mild climates and abandoned by their supplier the moment something fails. Ours are specified differently, and supported differently.
T3 is the tropical rating: units built and tested for high-ambient conditions rather than adapted from a European design. It is printed on the rating plate, not a marketing phrase.
Both models are reverse-cycle. The AC14K delivers 14,000 BTU/h of heat, the AC20K 20,000 BTU/h — by moving heat indoors rather than burning anything, which is cheaper than any electric heater.
The compressor varies its speed to match demand instead of switching fully on and off. Rated SEER 15.20 and SCOP 11.50 on the energy label, in the top band.
R32 carries more heat per kilogram than R410A and has roughly a third of its global warming potential, so the system needs a smaller charge to do the same work.
A perfectly good unit installed badly will underperform and leak. Our installation teams do the pipework, vacuum and commissioning themselves, and the workmanship is warranted.
A local factory, a local phone number, and a named technician. No overseas service centre, no importer who has stopped answering.
Most air conditioners sold in this region were designed for a mild European summer and shipped here unchanged. MTK units are built to a T3 specification — the tropical climate class — which is tested at ambient temperatures a standard unit is never asked to handle.
That specification is what we buy on, and it is printed on every rating plate. Beyond the unit itself, we hold the service parts locally and our own technicians install and maintain them.
Two capacities covering everything from a bedroom to an open retail floor, both reverse-cycle. Not sure which fits your room? Call us with the dimensions and we will size it for you.
12,000 BTU cooling · 14,000 BTU heating
18,000 BTU cooling · 20,000 BTU heating
We install, service and clean air conditioning of every type and every brand — homes, offices, shops, clinics and industrial sites alike.
From a single wall split to a full VRF or chilled-water installation. Most air conditioner complaints are installation faults, not unit faults — our teams do the pipework, vacuum and commissioning properly, and we warrant the workmanship.
Not cooling, leaking water, tripping the breaker or making a noise it did not make last year? We diagnose the fault first and quote second, so the price you agree is the price you pay.
A fouled coil makes your air conditioner work harder, cool less and smell worse. A proper deep clean is the cheapest performance improvement available to any AC unit.
Not only wall splits, and not only our own units. If it cools a building, we install it, maintain it and clean it.
The standard room unit, including our own AC14K and AC20K.
One outdoor unit driving several indoor units across different rooms.
Recessed four-way units in offices, clinics and retail ceilings.
Hidden units feeding several rooms through ductwork and grilles.
High-capacity cabinet units for halls, showrooms and mosques.
Self-contained rooftop and through-wall systems.
Chilled-water plant, air handling units and fan coil networks.
Variable refrigerant flow systems across whole buildings.
Tell us the room size, or the fault you are seeing. For most enquiries that is enough for us to quote a price over the phone.
For a new unit we check the cooling load against the room. For a repair we identify the fault before quoting, so the price does not move afterwards.
A fixed appointment window and the name of the technician who will arrive, so you are not waiting the whole day.
Pressure test, vacuum, gas charge, and a running check in front of you. You get the warranty documentation before we leave.
Replace these with real quotes before launch — see the note in src/site.config.mjs.
Replace this with a real quote from a customer. Two or three sentences about a specific job works far better than general praise.
A second real quote. If you have Google reviews, quote them here word for word and link the profile.
A third. Commercial customers carry weight with other businesses, so include one if you have it.
MTK is the brand. The units are built to MTK specification — the T3 climate class, R32 refrigerant and inverter control are ours to specify, and the rating plates and energy labels carry the MTK name and model numbers. We then handle supply, installation, maintenance, spare parts and warranty ourselves, which is the part that usually goes missing with an imported brand.
As a rough guide, the MTK-AC14K (12,000 BTU) suits a room up to about 20 m² and the MTK-AC20K (18,000 BTU) up to about 30 m². Sun exposure, ceiling height, window area and how many people use the room all change the answer, so call us with the dimensions and we will size it properly.
Yes. Our maintenance, repair and cleaning teams work on every type of air conditioning from any manufacturer — wall splits, cassettes, ducted systems, floor-standing units, packaged units, VRF and central chilled-water plant.
Yes. We supply across Syria and are expanding into neighbouring Arab markets. Call us with your location and we will confirm coverage and lead time.
Yes. Both models are reverse-cycle heat pumps. The MTK-AC14K produces 14,000 BTU/h of heat and the MTK-AC20K 20,000 BTU/h. A heat pump moves heat into the room rather than generating it, which makes it substantially cheaper to run than an electric heater of equivalent output.